40 GPH AC Watermaker
Two membranes in series for twice the water in the same run time. Fill bigger tanks faster, or run the generator less, while the full system draws about 1,000 watts.
- Output
- 40 gallons per hour
- Power
- 120V/240V AC, 50 or 60 Hz
- Power draw
- ~1,000W depending on ocean conditions
- High-pressure pump
- AR nickel-plated triplex pump paired with a 1 HP motor
- Membrane housings
- Two fiberglass housings with 316 hardware, rated for 800+ PSI
- Membranes
- Two FilmTec SW30-2540 RO membranes in series
- Boost pump
- 12V / 24V DC
- Prefiltration
- 10" 20 µm and 5 µm pleated prefilters
- Fresh-water flush
- CTO carbon filter with auto rinse
What you get
Every Vectech watermaker comes with everything you need to make fresh water. We take pride in offering the highest-quality parts at a fraction of the cost of other watermakers on the market. It’s a simple system designed for DIY installation, and it can be serviced anywhere in the world with off-the-shelf parts. Once you own a Vectech watermaker, you can buy spare and replacement parts from us at wholesale prices for life.
Please note: A sea strainer isn’t included. The boost pump is submersible, so you can drop it overboard while the boat is stationary or plumb it into your existing strainer. Every watermaker ships with the membranes pre-installed in their housings, and a control panel comes mounted on the membrane housing by default. An optional remote control panel and a 3-way diverter valve are also available.
What’s included
- 12V/24V DC boost pump
- 3× 10" filter housings (20 µm, 5 µm, and CTO carbon)
- Check valves and auto-flush system
- AR nickel-plated high-pressure pump
- 1 HP capacitor-start, capacitor-run motor
- 2× fiberglass membrane housings
- 2× FilmTec SW30-2540 membranes
- 316 stainless steel control valve
- All 316 stainless steel and plastic fittings
- 6 ft of high-pressure hose and 15 ft of low-pressure hose
- 316 stainless steel color-coded gauges
