12V DC 20 GPH Watermaker
Runs straight off your house bank with no inverter in between, so none of your power is lost to conversion. Our most efficient path to fresh water, driven by a USA-made LEESON motor.
- Output
- 20 gallons per hour
- Power
- 12V DC, straight from the house bank
- Power draw
- ~600W depending on ocean conditions
- High-pressure pump
- AR nickel-plated triplex pump paired with a USA-made LEESON 12V DC motor
- Membrane housing
- Fiberglass housing with 316 hardware, rated for 800+ PSI
- Membrane
- FilmTec SW30-2540 RO membrane
- Boost pump
- 12V / 24V DC
- Prefiltration
- 10" 20 µm and 5 µm pleated prefilters
- Fresh-water flush
- CTO carbon filter with auto rinse
What you get
Every Vectech watermaker comes with everything you need to make fresh water. We take pride in offering the highest-quality parts at a fraction of the cost of other watermakers on the market. It’s a simple system designed for DIY installation, and it can be serviced anywhere in the world with off-the-shelf parts. Once you own a Vectech watermaker, you can buy spare and replacement parts from us at wholesale prices for life.
Please note: A sea strainer isn’t included. The boost pump is submersible, so you can drop it overboard while the boat is stationary or plumb it into your existing strainer. Every watermaker ships with the membranes pre-installed in their housings, and a control panel comes mounted on the membrane housing by default. An optional remote control panel and a 3-way diverter valve are also available.
What’s included
- 12V/24V DC boost pump
- 3× 10" filter housings (20 µm, 5 µm, and CTO carbon)
- Check valves and auto-flush system
- AR nickel-plated high-pressure pump
- USA-made LEESON 12V DC motor
- 1× fiberglass membrane housing
- 1× FilmTec SW30-2540 membrane
- 316 stainless steel control valve
- All 316 stainless steel and plastic fittings
- 6 ft of high-pressure hose and 15 ft of low-pressure hose
- 316 stainless steel color-coded gauges
